Monarch Industrial Products Filters and Strainers
Model:
ELSC-10 Cartridge Filter-Strainer
Application:
Liquid Strainer
Media:
Stainless Steel or Melt Blow Cartridge


1" BSP ELF-S Series 10" Filter Housing is specially designed for low flow rates. With a single die-casted top piece design, the ELF-S in-line filter can be easily connected to the pipeline directly. The filter element can be replaced by only removing the bottom housing, featuring simple maintenance with no leakage. A drain valve is located at the bottom for liquid discharge.

  • Operating pressure to 20 bar permits use in wide range of applications
  • In-line inlet and outlet connections for easy installation
  • Quick-opening design with rugged cast clamp for fast filter change-outs
  • Stainless steel for durable and corrosion resistance
Material:
304 and 316L Stainless Steel
Seals:
Buna-N, EPDM, Silicone, Viton
Pressure:
20 Bar
Closure:
Tri Clamp
Connections:
1" BSP Inlet & Outlet
1/4" BSP Vent Port
1/4" Drain Port
Model Cartridge Connection L1 L2 Weight
ELSC-10 10" 1" BSP 122 mm 380 mm 4.75 kgs
ELSC-20 20" 1" BSP 122 mm 634 mm 6.0 kgs
Factors to be Taken Account of when Selecting a Strainer:
  • Fluid type
  • Flow rate
  • Viscosity
  • Temperature – operating and design
  • Pressure – operating and design
  • Degree of filtration required
  • Connection type i.e. flanged PN16, ASA150, screwed BSP, NPT
  • Any special requirements i.e. heating jacket, magnets, mounting brackets, dp indicator/switch etc.

All stainless Steel Cartridge inserts with polyethylene moulded ends, with seal.

Made in Australia by Monarch

Micron Code Description
80 CART-A-0080 Woven Wire Mesh with Perforated Support Layer
100 CART-A-0100 Woven Wire Mesh with Perforated Support Layer
130 CART-A-0130 Woven Wire Mesh with Perforated Support Layer
150 CART-A-0150 Woven Wire Mesh with Perforated Support Layer
190 CART-A-0190 Woven Wire Mesh with Perforated Support Layer
260 CART-A-0260 Woven Wire Mesh with Perforated Support Layer
310 CART-A-0310 Woven Wire Mesh with Perforated Support Layer
415 CART-A-0415 Woven Wire Mesh with Perforated Support Layer
530 CART-A-0530 Woven Wire Mesh with Perforated Support Layer
600 CART-A-0600 Woven Wire Mesh with Perforated Support Layer
800 CART-A-0800 Perforated Layer only
810 CART-A-0810 Woven Wire Mesh with Perforated Support Layer
900 CART-A-0900 Woven Wire Mesh with Perforated Support Layer
1000 CART-A-1000 Woven Wire Mesh with Perforated Support Layer
1100 CART-A-1100 Perforated Layer only
1500 CART-A-1500 Perforated Layer only
2000 CART-A-2000 Perforated Layer only
3000 CART-A-3000 Perforated Layer only
4000 CART-A-4000 Perforated Layer only
5000 CART-A-5000 Perforated Layer only
     

Other micron sizes and construction types available on request.

Monarch General Engineering and Machine Shop Services Brendale Brisbane Queensland

Monarch Asia Pacific Pty Ltd, Copyright © 2022 All Rights Reserved
Release: 22:1:1