Menu
ESLC-10 Cartridge Filter-Strainer
- Operating pressure to 21 bar permits use in wide range of applications
- In-line inlet and outlet connections for easy installation
- Quick-opening design with rugged cast clamp for fast filter change-outs
- Stainless steel for durable and corrosion resistance
The ESLC Cartridge-Strainer Housing is suitable for low flow rates. With a single die-casted top piece design, the ESLC in-line filter can be easily connected to the pipeline directly.
The filter element can be replaced by only removing the bottom housing, featuring simple maintenance with no leakage. A drain valve is located at the bottom for liquid discharge.
Monarch Strainers and Filters are supported by our General Engineering Workshop in Brisbane. We also manufacture in Brisbane a comprehensive range of replacement baskets and screens.
Material 316L: ESLC-S107B21025B
1/4" BSP Vent Port
1/4" Drain Port
Documentation Available
- Pressure Test Report
- Quality Certificate
- As Built Drawing
| Model | Cartridge | Connection | L1 | L2 | Weight |
|---|---|---|---|---|---|
| ESLC-10 | 10" | 1" BSP | 122 mm | 380 mm | 4.75 kgs |
- Fluid type
- Flow rate
- Viscosity
- Temperature – operating and design
- Pressure – operating and design
- Degree of filtration required
- Connection type i.e. flanged PN16, ASA150, screwed BSP, NPT
- Any special requirements i.e. heating jacket, magnets, mounting brackets, dp indicator/switch etc.
Perforated Screen Only
Code Example:
CART
10 -
A -
0500-304 -
V
AS = 316 Stainless ends
B = BunaN
0800-304 = 0.8mm perforations
1000-304 = 1.0mm perforations
1500-304 = 1.5mm perforations
2000-304 = 2mm perforations
3000-304 = 3mm perforations
4000-304 = 4mm perforations
5000-304 = 5mm perforations
1100-316 = 1.1mm perforations
1500-316 = 1.5mm perforations
2000-316 = 2mm perforations
3000-316 = 3mm perforations
4000-316 = 4mm perforations
5000-316 = 5mm perforations
Perforated Support with Mesh Layer
Code Example:
CART
10 -
A
50 -
0810-316 -
V
AS = 316 Stainless ends
B = BunaN
63 = 5mm perforations, 304 S/S (Material has 63&percent; open area)
0530-316 = 530 Micron
0415-316 = 415 Micron
0310-316 = 310 Micron
0260-316 = 260 Micron
0210-316 = 210 Micron
0190-316 = 190 Micron
0150-316 = 150 Micron
0130-316 = 130 Micron
0100-316 = 100 Micron
0080-316 = 80 Micron
10/18 =10µ Nominal, 18µ Absolute
15/26 =15µ Nominal, 26µ Absolute
25/38 = 25µ Nominal, 38µ Absolute
35/45 = 35µ Nominal, 45µ Absolute
Cartridge Filters
Cartridge filters can be used for a wide variety of applications with varied flow rates that require sub-micron retention rating, including food and beverage, chemicals, paint and the filtration of acids and bases. Cartridge filtration can also be a suitable choice for pharmaceutical and ultra-pure water applications.
Monarch Asia Pacific Pty Ltd
Trading as Monarch Industrial Products
ABN 60 141 555 688
Unit 3, 8 Bult Drive, Brendale, QLD 4500
AUSTRALIA
Phone: +61 (0) 7 3889 9949
Monarch Asia Pacific Pty Ltd, © 2026 All Rights Reserved
Release: 26:1:0