Wright Austin/Eaton Type T Gas Liquid Separators - Cast
Wright Austin/Eaton Type T Gas Liquid Separators - Cast
Sizes 1” to 5”
Threaded, Flanged, or Socket Weld
Cast Iron, Cast Carbon Steel, or Cast Stainless Steel
Selection table for Type T
Pipe
Size in (in)
Material
Connection
Rating
3/4" to 3"
Cast Iron
NPT Threaded
250 psi @ 450°F
2" to 5"
Cast Iron
ANSI 125# Flanged
150 psi @ 353°F, 125 psi @ 450°F
1" to 2"
Cast Carbon Steel
NPT Threaded or Socket Weld
1000 psi @ 650°F
1" to 2"
Cast Stainless Steel
NPT Threaded or Socket Weld
500 psi @ 300°F
1" to 2"
Cast Carbon Steel
ANSI Flanged
150#, 300# and 600#
1" to 2"
Cast Stainless Steel
ANSI Flanged
150# and 300#
Refer to Fabricated T Style for more options and sizes.

High Efficiency – No Maintenance
The Eaton/Wright Austin Type T Gas/Liquid Separator automatically removes 99% of all liquid and solid entrainment particles 10 microns in size or larger from air, gas, and steam processes. And it does so with no moving parts to wear out and no required maintenance. The Type T, with its cost-effective design, is the separator of choice for most applications that require clean, dry air, gas or steam.

Exclusive Design
Moisture-laden gas enters the inlet of the separator where it is deflected in a centrifugal downward motion. The entrained solids and moisture droplets are separated out by a reduction in velocity. Separated liquid and solids fall into a reservoir where the exclusive Vortex Containment Plate (VCP) ensures that they cannot be re-entrained. The clean, dry flow is then directed to the outlet by the VCP. This eliminates the need for expensive, delicate baffles used in ordinary separators.

Application Flexibility
The basic Type T Gas/Liquid Separator’s straightforward, time-proven design fits most applications without options. For more specialized applications, the Type T is available as the Type ST with an integral trap as part of its design. The trap mechanism is a foolproof design which automatically ejects the condensate, without loss of line pressure, when it reaches a predetermined level. The Type ST is compact, easily installed, and can be supported by the line. Removal of the bottom flange releases the trap mechanism for inspection. The internal trap components are rust-proof stainless steel and include a nonmagnetic 18-8 stainless steel valve and seat. For applications below freezing, the Type ST Separator can be ordered as the Type STH that includes a heater for the trap. The heater is rated at 50W and runs with 110/240 volt service. The self-limiting heating element will keep fluid above freezing but does not add to the line temperature. The heater can be easily removed for inspection.

Features
  • Cast Construction
  • High Efficiency Over Wide Flow Range.
  • No Required Maintenance
  • Economical Choice for Most Applications
  • Removes 99% of Liquid and Solid Entrainment Particles Larger Than 10 Microns
  • Gas, Steam, or Air Applications
Options
  • Integral Trap
  • Trap Heating Element
  • ASME UM or U Code Stamp (CS and SS Models Only)
  • Water Gauge Tap
  • Thermometer Tap
  • Larger Drain Size
Capacities - Max Air Flow rating in SCFM
Pipe
Size
25 psig
50 psig
100 psig
150 psig
200 psig
250 psigl
3/4"
55
75
105
125
150
170
1"
82
110
155
190
220
225
1-1/4"
130
175
245
300
345
400
1-1/2"
185
245
345
425
485
560
2"
330
445
620
770
870
1000
2-1/2"
500
680
945
1170
1350
1550
3"
750
1000
1400
1750
1950
2300
4"
1325
1775
2500
3075
3600
4000
5"
2050
2750
3800
4750
5200
6000
Rated ΔP
0.88 psi
0.99 psi
1.19 psi
1.40 psi
1.60 psi
1.85 psi
Standard Type T Separators
Typical Installation
Type T Threaded
Type T Flanged ANSI 125# FF
Type T Threaded Dimensions
NPT Connections
250 PSI @ 450 °F
Pipe
A
B
C
D
J NPT
J NPT
Weight
Code
Size
mm
mm
mm
mm
Standard
Optional
NPT
kgs
0.75TAN
3/4"
140
223
-
146
3/4"
-
1/4"
10
1.TAN
1"
152
229
-
171
1"
1-1/4"
1/4"
11.4
1.25TAN
1-1/4"
152
232
-
178
1"
1-1/4"
1/4"
12.7
1.5TAN
1-1/2"
184
297
-
207
1"
1-1/2"
1/4"
20
2.TAN
2"
206
348
-
216
1"
2"
1/4"
21.3
2.5TAN
2-1/2"
305
405
89
289
1-1/4"
2"
1/4"
40
3.TAN
3"
281
405
89
289
1-1/4"
2-1/2"
1/4"
48
Type T Flanged Dimensions
ANSI 125# FF Flanges
125 PSI @ 450 °F
Pipe
A
B
C
D
J NPT
J NPT
Weight
Code
Size
mm
mm
mm
mm
Standard
Optional
NPT
kgs
2.TFN
2"
267
349
-
216
1"
2"
1/4"
27
3.TFN
3"
356
406
89
289
1-1/4"
2-1/2"
1/4"
59
4.TFN
4"
403
492
127
357
1-1/4"
2-1/2"
1/4"
88.6
5.TFN
5"
467
626
200
432
1-1/4"
-
1/4"
168
Type ST & STH Separators with Trap and Heater Option
Type ST NPT with Trap
Type STH NPT with Trap (heater)
Type ST 3/4" NPT with Trap
Type T Threaded Dimensions
NPT Connections
250 PSI @ 450 °F
Pipe
A
B
C
D
Drain
Vent
Weight
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
(ST) kgs
(STH) kgs
0.75STBN
3/4"
140
297
-
171
3/4"
1/4"
14.1
14.0
1.STBN
1"
152
260
-
171
3/4"
1/4"
17.7
18.7
1.25STBN
1-1/4"
152
311
-
178
3/4"
1/4"
23.3
22.3
1.5STBN
1-1/2"
184
357
-
207
3/4"
1/4"
24.0
24.0
2.STBN
2"
206
380
-
216
3/4"
1/4"
26.3
26.0
2.5STBN
2-1/2"
305
520
-
289
3/4"
1/4"
29.5
50.0
3.STBN
3"
281
570
-
289
3/4"
1/4"
47.7
48.7
Type ST NPT with Trap
Type STH NPT with Trap (heater)
Type T Flanged Dimensions
ANSI 125# FF Flanges
125 PSI @ 450 °F
Pipe
A
B
C
D
Drain
Vent
Weight
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
(ST) Kgs
(STH) kgs
2.STFN
2"
267
389
-
216
3/4"
1/4"
23.2
24.2
3.STFN
3"
356
519
-
289
3/4"
1/4"
45.5
46.5
4.STN
4"
403
597
-
357
3/4"
1/4"
102.3
103.3
5.STN
5"
467
787
-
432
3/4"
1/4"
177.0
178.0
Type T Separators Carbon Steel

Type T Gas/Liquid Separators are available in 1”, 1-1/4”, 1-1/2”, and 2” sizes in cast carbon steel or cast stainless steel with standard configurations. Cast construction separators are readily available but not easy or cost effective to modify to conform to special application requirements. For these applications, see Fabricated Type T Separators which are made of carbon or stainless steel in sizes up to 24”. Fabricated separators are not as heavy as cast ones, an important consideration in applications when weight is a concern.

Typical Installation
Type T Threaded
Type T ANSI 125# FF Flange
Type T Threaded Dimensions
NPT Connections
1000 PSI @ 650 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1TC
1"
161
267
141
25
1/4"
1"
4-3/4"
11.4
1.25TC
1-1/4"
161
267
141
32
1/4"
1"
4-3/4"
12.7
1.5TC
1-1/2"
194
317
168
40
1/4"
1"
4-3/4"
20
2TC
2"
194
317
168
50
1/4"
1"
4-3/4"
21.3
Type T Socket Weld Dimensions
Socket Weld Connections
1000 PSI @ 650 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1TWC
1"
161
267
141
25
1/4"
1"
4-3/4"
11.4
1.25TWC
1-1/4"
161
267
141
32
1/4"
1"
4-3/4"
12.7
1.5TWC
1-1/2"
194
317
168
40
1/4"
1"
4-3/4"
20
2TWC
2"
194
317
168
50
1/4"
1"
4-3/4"
21.3
Type T Flanged Dimensions
ANSI 150# RF Flanges
150 PSI @ 450 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1T150C
1"
267
267
141
25
1/4"
1"
4-3/4"
13.0
1.25T150C
1-1/4"
267
267
141
32
1/4"
1"
4-3/4"
13.6
1.5T150C
1-1/2"
292
317
168
40
1/4"
1"
4-3/4"
24.0
2T150C
2"
292
317
168
50
1/4"
1"
4-3/4"
25.8
Type T Flanged Dimensions
ANSI 300# RF Flanges
500 PSI @ 650 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1T500C
1"
267
267
141
25
1/4"
1"
4-3/4"
13.0
1.25T500C
1-1/4"
267
267
141
32
1/4"
1"
4-3/4"
13.6
1.5T500C
1-1/2"
292
317
168
40
1/4"
1"
4-3/4"
24.0
2T500C
2"
292
317
168
50
1/4"
1"
4-3/4"
25.8
Type T Flanged Dimensions
ANSI 600# RF Flanges
750 PSI @ 650 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1T750C
1"
267
267
141
25
1/4"
1"
4-3/4"
13.0
1.25T750C
1-1/4"
267
267
141
32
1/4"
1"
4-3/4"
13.6
1.5T750C
1-1/2"
292
317
168
40
1/4"
1"
4-3/4"
24.0
2T750C
2"
292
317
168
50
1/4"
1"
4-3/4"
25.8
Type T Separators Stainless Steel

Type T Gas/Liquid Separators are available in 1”, 1-1/4”, 1-1/2”, and 2” sizes in cast carbon steel or cast stainless steel with standard configurations. Cast construction separators are readily available but not easy or cost effective to modify to conform to special application requirements. For these applications, see Fabricated Type T Separators which are made of carbon or stainless steel in sizes up to 24”. Fabricated separators are not as heavy as cast ones, an important consideration in applications when weight is a concern.

Typical Installation
Type T Threaded
Type T ANSI Flange
Type T Threaded Dimensions
NPT Connections
500 PSI @ 300 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1TS6
1"
161
267
141
25
1/4"
1"
4-3/4"
11.4
1.25TS6
1-1/4"
161
267
141
32
1/4"
1"
4-3/4"
12.7
1.5TS6
1-1/2"
194
317
168
40
1/4"
1"
4-3/4"
20
2TS6
2"
194
317
168
50
1/4"
1"
4-3/4"
21.3
Type T Socket Weld Dimensions
Socket Weld Connections
500 PSI @ 300 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1TWS
1"
161
267
141
25
1/4"
1"
4-3/4"
11.4
1.25TWS6
1-1/4"
161
267
141
32
1/4"
1"
4-3/4"
12.7
1.5TWS6
1-1/2"
194
317
168
40
1/4"
1"
4-3/4"
20
2TWS6
2"
194
317
168
50
1/4"
1"
4-3/4"
21.3
Type T Flanged Dimensions
ANSI 150# RF Flanges
150 PSI @ 300 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1T150S6
1"
267
267
141
25
1/4"
1"
4-3/4"
13.0
1.25T150S6
1-1/4"
267
267
141
32
1/4"
1"
4-3/4"
13.6
1.5T150S6
1-1/2"
292
317
168
40
1/4"
1"
4-3/4"
24.0
2T150S6
2"
292
317
168
50
1/4"
1"
4-3/4"
25.8
Type T Flanged Dimensions
ANSI 300# RF Flanges
500 PSI @ 300 °F
Pipe
A
B
C
D
E
F
H
Weight
Code
Size
mm
mm
mm
mm
NPT
NPT
in
kgs
1T500S6
1"
267
267
141
25
1/4"
1"
4-3/4"
13.0
1.25T500S6
1-1/4"
267
267
141
32
1/4"
1"
4-3/4"
13.6
1.5T500S6
1-1/2"
292
317
168
40
1/4"
1"
4-3/4"
24.0
2T500S6
2"
292
317
168
50
1/4"
1"
4-3/4"
25.8
  • Steam Drums
  • Steam Turbines
  • Intercooler Equipment
  • Aftercooler Equipment
  • Gas Well Heads
  • Deep Well Heads
  • Oil Extraction
  • Chemical Processing
  • Scrubbing Systems
  • Evaporator
  • Glycol Dehydration
  • Sulfer Condenser
  • Mist Elimination
  • Heat Exchangers
  • Reactors Landfill/Waste Gas
Separator Product and Application Inquiry Form
Contact Details
Name*
Company Name
Street Address
City
Country (Please select)
Email*
Confirm Email*
Phone Number
Products of Interest







Product Code (optional)
Application Parameters



Pipe Size
in inches
in mm
Volumetric Flow
in SCFM
in MMSCFD
in NM³/hr
Weight Flow
in lb/hr
in kg/hr
Average Molecular Weight
Minimum Operating Pressure
in psig
in kg/cm²
in bar
Maximum Operating Temperature
in °C
in °F
Flow Configuration Preference

Design Pressure of Vessel
in psig
in kg/cm²
in bar
Design Temperature of Vessel
in °C
in °F
Maximum Entrained Liquid
in lb/hr
in lpm
in kg/hr
End Connections


Connection Pressure Rating



Materials of Construction



Question
* Required Fields